Wind direction calibration for your Weather Station: Vantage Connect or Enviromonitor

Wind direction calibration for your Weather Station: Vantage Connect or Enviromonitor

Overview:

A Davis weather station's anemometer should be oriented northward. A correction can be made inside WeatherLink.com if this isn't done or isn't feasible. The steps to accomplish this are outlined below.

Instructions for using EnviroMonitor

  • Go to WeatherLink.com and find the weather station that needs to be fixed.
  • Next, select Device->Device Configuration from the "wrench" symbol.
  • Then, next to the highlighted ID #, click "edit."
  • Select "advanced options" on the following screen. (For further information, check below image)
  • Finally, in degrees, input the angle between the install direction and true North, then click exit.
Weatherlink: Wind direction calibration for your Weather Station

Weatherlink Config: Wind direction calibration for your Weather Station

APEXS: Weatherlink Config Advance: Wind direction calibration for your Weather Station

APEXS: weatherlink advance config wind: Wind direction calibration for your Weather Station



Vantage Connect Instructions

  • Log in to WeatherLink.com and choose the weather station that need correction.
  • Then go to Device->Device Settings by clicking the "wrench" symbol.
  • Finally, in degrees, input the difference between the install direction and actual North, then save and exit.
APEXS: Vantage Connect device setting, Wind direction calibration for your Weather Station



Please contact us with any further questions.

[email protected]





Wind calibration on your Vantage Connect Weather Station

Wind calibration on your Vantage Connect Weather Station

Overview:

The anemometer at a Davis weather station should face north. If this isn't done or isn't possible, a correction can be made through WeatherLink.com. The procedures for doing so are explained below.

Vantage Connect used instructions:

  • Log in to WeatherLink.com and choose the weather station that need adjustment.
  • Then, by clicking the "wrench" icon, navigate to Device => Device Settings.
  • Finally, enter the difference in degrees between the install direction and true North, save, and exit.
 
Weatherlink device settings: Wind calibration on your Vantage Connect Weather Station


Wind calibration on your EnviroMonitor Weather Station

Wind calibration on your EnviroMonitor Weather Station

Overview:

The anemometer at a Davis weather station should face north. If this isn't done or isn't possible, a correction can be made through WeatherLink.com. The procedures for doing so are explained below.

EnviroMonitor use instructions:

  • Go to WeatherLink.com and select the weather station that needs to be fixed.
  • Then, from the "wrench" icon, select Device => Device Configuration.
  • Then click "edit" next to the highlighted ID #.
  • On the next page, select "advanced settings." (See the picture below for more details.)
  • Finally, enter the angle between the install direction and true North in degrees before clicking exit. 
EnviroMonitor Weatherlink Device Config: Wind calibration on your EnviroMonitor Weather Station
EnviroMonitor Weatherlink Advance Settings: Wind calibration on your EnviroMonitor Weather Station
EnviroMonitor Weatherlink Advance Settings for wind: Wind calibration on your EnviroMonitor Weather Station

 
 
Please contact us with any further questions.

 
 


Award winning and recognized