Maintaining the Anemometer Wind Cups in Vantage Pro2 weather station

Maintaining the Anemometer Wind Cups in your weather station will assure you that your weather data will continue to perform at their highest accuracy.


These are some issues you may have encountered if no regular maintenance has been made into your anemometer wind cups.

  • Spiders and other insects can interfere with the rotation of the cups. 
  • Debris.

APEXS: Maintaining the Anemometer Wind Cups in Vantage Pro2 weather station


The common solutions you may used in maintaining your anemometer wind cups is to do the following:

  • If wind speed seems low, use an Allen wrench to loosen the setscrew on the side of the wind cups. 
  • Remove the wind cups, and clean the exposed portion of the shaft with a damp cloth or cotton swab. 
  • Clean the wind cups with water and a mild liquid detergent. Rinse thoroughly before replacing.
  • After replacing the wind cups and tightening the setscrew, check to make sure that the wind cups spin freely. 
  • If they do not, the bearings may be worn and need factory repair.

Caution, take an extra precaution when doing the maintenance.

  • Do not use or add grease, oil, or a spray lubricant of any kind in your anemometer.
 
 

Tags :

bm

APEXS,

Incorporated

You can visit our company website at www.apexsinc.com.

  • Bldg.1 Room 714, EGI Maribago Lapu-Lapu City, Cebu 6015 PH
  • [email protected]
  • +6332-495-2106
  • +6332-268-6937
  • +63917-312-9336

Post a Comment

Award winning and recognized